Pair of bronze custom colour alloy wheels after refurbishment at Vantom Automotive, Congleton, Cheshire

How Long Does Alloy Wheel Refurbishment Take? A Day-by-Day Guide

Most alloy wheel refurbishments at our Congleton workshop take two days: you drop the car off at 9am, and it's usually ready to collect between 1pm and 6:30pm the next day. Diamond cut wheels are always next day. If you need your car back sooner, powder coated wheels can be done the same day with our £72 same-day priority service.

That's the short answer to how long alloy wheel refurbishment takes. The longer answer is in what happens to your wheels in between, so we asked Kyle Tiley, who runs Vantom, to walk through a normal job from drop-off to collection. It's the same process whether you're local to Congleton or coming over from Macclesfield or Sandbach.

How long does alloy wheel refurbishment take, step by step?

Day one, 9am: drop-off and a walk-round

"Customers drop their vehicles off at 9am," Kyle says. "We check the vehicle over with the customer to make sure any scratches and damage on the car are noted before they leave."

That walk-round protects you and us. Once it's done, the wheels come off the car, the tyres come off the wheels, and the wheels go to their own dedicated bay.

Day one: inspection and stripping

With the tyres off, every wheel is checked for buckles and cracks, on the inner barrel as well as the face.

Then the wheels go in the acid to strip the old paint off. "We then take the wheels out and neutralise them," Kyle explains. How long the stripping takes depends on the wheel and how many layers of old paint and corrosion are on it, and that's what decides your collection time the next day.

Day one: repairs and sandblasting

Once the wheel is back to bare metal, we check the damage again. "We'll sand it if it's very light, or weld it and reshape it," Kyle says. After that, it goes into the sandblaster, which cleans the metal and leaves it ready for powder coat.

Day two: powder coating and diamond cutting

Most of the time, the coating happens on day two. The wheel is heated and coated with primer powder. If it's being diamond cut, it's left to cool and goes on the diamond cutter. If not, it carries straight on with the colour coat and then the clear coat. You can see each of these stages photographed on our refurbishment process page.

Day two, 1pm to 6:30pm: collection

Collection is usually between 1pm and 6:30pm, depending on how long the paint took to strip on day one. When you pick up, we'll give you any information about your wheels. "If there was a lot of corrosion, sometimes we can't remove it all," Kyle says. "But 95% of the time the wheels come out like new."

Before you drive away, we check the car over again with you to make sure no damage has happened while it was with us.

What can make a refurb take longer than next day?

Very little, in Kyle's experience. "We don't usually need a third day," he says, "unless the customer had buckles or cracks and they were not reachable on text or phone."

That's because buckle and crack repairs are extra work (£96 per buckled wheel or £96 per crack), so we always ask before doing them. If we can't get hold of you, the wheel waits. So keep your phone handy on the day you drop off.

The other thing that helps? "Drop the vehicle off on time," Kyle says, "and we usually handle the rest of it."

Got a deadline, like a lease return? Send us a few photos of your wheels and we'll tell you whether next-day or same-day priority suits. Book alloy wheel refurbishment in Congleton or call 0330 133 8719.

Same-day priority and diamond cut wheels

If you can't be without the car overnight, we offer same-day priority for £72 extra. "We'll focus on that customer's wheels," Kyle says.

Diamond cut wheels are different: they're always next day. The wheel has to be primed, cooled and machined on the lathe before it's finished, so there's no shortcut. A recent example was a Lamborghini Urus with kerbed wheels. The owner was returning the car to the lease company, so we refurbished the wheels in diamond cut before it went back.

Diamond cut refurbishment is £144 per wheel or £576 for four, and powder coated refurbishment is £90 per wheel or £360 for four. See all our alloy wheel refurbishment costs explained.

Why not two hours, or a week?

You'll see some places promise a refurb in a couple of hours, and others that keep your wheels for a week. Kyle's view is simple.

"The two-hour ones are usually smart repairs, which are a temporary solution, as they don't take the tyres off," he says. With the tyre left on, the whole wheel can't be stripped and coated the way we've described above.

"Companies who take a week, in my opinion, are usually farming the work out to companies like ours." We do everything in-house at our Congleton workshop, from taking the wheels off to balancing and refitting them, which is why next day is our standard.

Quick answers

Can I wait while my wheels are refurbished?

Not for a full refurbishment. It's a two-day job, or same day with £72 priority on powder coated wheels. Buckle and crack repairs on their own are walk-in jobs and can often be done while you wait.

What time should I drop my car off?

9am. We'll walk round the car with you before you leave it.

Do I need to do anything on the day?

Keep your phone on. If we find a buckle or crack, we'll contact you before doing any extra work.

Book alloy wheel refurbishment in Congleton

We refurbish wheels in-house at our Congleton workshop for drivers across Cheshire and Staffordshire, including Macclesfield and Sandbach. Powder coated refurbishment is £90 per wheel or £360 for four (up to 23"), with next-day turnaround as standard and a 12-month warranty (subject to terms).

Book your alloy wheel refurbishment

Not sure what you need? Send us a few clear photos or call 0330 133 8719 and we'll give you honest advice. Pay by card, Apple Pay, Google Pay, PayPal or Klarna.

Back to blog